Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to define a spring "Body-Ground" with 3 different stiffnesses ?

Status
Not open for further replies.
Ezequiel1982

Ezequiel1982

New member
Joined
Jun 20, 2010
Messages
37
Location
ES
Hi to all,

Does anyone could tell me how to define a spring "Body-Ground" with 3 different stiffnesses (X,Y,Z) in Ansys Workbench 145 ?.

The only option I´ve found is the spring with longitudinal stiffness..

Thanks in advance !
 
Sort by date Sort by votes
use 1 spring for each direction (PITA) or use a bush joint (also a bit of a PITA)

probably an APDL command might do the same but i avoid doing commands if i can work around it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
878
MihailW
M
md_salem
  • Locked
  • Question Question
Hello everyone, How to define an e
Replies
0
Views
214
md_salem
md_salem
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun

Part and Inventory Search

Sponsor

Back
Top