Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to create Rigid links using Center of gravity and Moments of Interia in Ansys WB?

Status
Not open for further replies.
Bruce321

Bruce321

Mechanical
Joined
Dec 3, 2014
Messages
5
Location
DE
Hello,
I need to analyse Rigid Body dynamics using a cross of two Rigid links attached to flexible D shaped 2d sketch in Ansys Workbench. The dimensions which I have are just centre of gravity of these two rigid links and Principal moment of Inertia.[ponder] Can you guys please help me on how to proceed with it?

Regards,
Bruce
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
4
Views
6K
rb1957
rb1957
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
0
Views
2K
mariyan.vt
M

Part and Inventory Search

Sponsor

Back
Top