Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Create Calming Perforated Baffle for Separator in PVELITE or AutoPipe Vessel?

Status
Not open for further replies.
SmallInfo

SmallInfo

Petroleum
Joined
Oct 30, 2017
Messages
104
Location
PK
Hi Experts,
I am creating a separator with a calming perforated baffle which I never put in vessel before, do you guys know how to put it in separator using preferable PVELITE but method using AutoPipe Vessel is fine as well.
Thanks in advance
Capture_vhwjxw.jpg
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
Vessel for Hydrotest over MAWP
Replies
7
Views
15K
Trestala
Trestala
imransaeed1804
  • Locked
  • Question Question
Applying torsional moment to shell/support in PVElite
Replies
4
Views
751
imransaeed1804
imransaeed1804
H
  • Question Question
NACE Requirements for completely Cladded pressure vessel in severe sour stream
Replies
5
Views
3K
SJones
SJones
Ratheesh_n
  • Question Question
stress reliving on 3mm 625 plate butt weld during PQR qualification for utilising in cladded vessel
Replies
2
Views
11K
Ratheesh_n
Ratheesh_n
SmallInfo
  • Locked
  • Question Question
How to Design Test Ring for Heat Exchanger in PVELITE or Autopipe ?
Replies
3
Views
456
SmallInfo
SmallInfo

Part and Inventory Search

Sponsor

Back
Top