How to Convert NX8.5 drawing into NX7.5 drawing?

[chetandm91]

Can any one tell me how to convert the NX8.5drawing file into NX7.5 drawing file. Please its bit urgent.

 

[jerry1423]

The really is not a way to do it, with NX or any other CAD system.
If the mistake was recently made you may be able to pull up a earlier file via WINDOWS.
RMC on the WINDOWS file icon and go into properties, the last tab is previous versions and you should be able to figure it out from there.
If you need more help, just ask.

 

[chetandm91]

Thanks Jerry. But i have created a drawing in NX8.5 and my customer wants it in NX7.5.
And he dont want to use other formats such as DWG/DXF etc. Can u tell me whether its possible to convert?

 

[jerry1423]

Yes, I have been down your path too, and I know how bad you are feeling.
It's a mistake that you make only once.
No, there really is not a way to go backwards to an earlier version.

 

[chetandm91]

Hmmm... any ways thank you verymuch Jerry for your informations.
C ya again...

 

[Toost]

The way to try rescue as much as possible is to export using Iges or maybe DXF. Iges supports drawings and assemblies.

regards
Tomas

 

[jerry1423]

and if you have notes on the drawing you should be able to use those