Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to carry over boundary conditions from 2d to 3d model in Abaqus?

Status
Not open for further replies.
optimus2007

optimus2007

Mechanical
Joined
Sep 3, 2008
Messages
29
Location
DE
After generating the 3d model from 2dax I want the boundary conditions (BC´s) to be carried over too.
How can I write this in the new generated (inp of the 3d-model) input-file?
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Symmetric boundary conditions
Replies
3
Views
1K
Ali asger
A
M
  • Locked
  • Question Question
How to get output in abaqus?
Replies
5
Views
5K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
A
  • Locked
  • Question Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
3K
FEA way
FEA way
M
  • Locked
Python script to obtain the Material name of each material in the Abaqus model
Replies
4
Views
5K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top