Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do we make Tapered NPT threads in CatiaV5
- Thread starter Abaddon
- Start date
As far as I know, you'll have to add a standard by entering a .txt file with the different dimensions in it.
As an example (helicoil screw-thread)
ThreadDiam. Pitch HoleDiam. M
3.08mm 0.45mm 2.60mm m2.5
3.65mm 0.50mm 3.10mm m3
4.91mm 0.70mm 4.10mm m4
6.04mm 0.80mm 5.20mm m5
7.30mm 1.00mm 6.20mm m6
Standard can be added under the hole-function
As an example (helicoil screw-thread)
ThreadDiam. Pitch HoleDiam. M
3.08mm 0.45mm 2.60mm m2.5
3.65mm 0.50mm 3.10mm m3
4.91mm 0.70mm 4.10mm m4
6.04mm 0.80mm 5.20mm m5
7.30mm 1.00mm 6.20mm m6
Standard can be added under the hole-function
- Status
Similar threads
- Question
- Locked
- Question