Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I create a 3 Wheeled vehicle on Adams Car?
- Thread starter Sajay99
- Start date
newbie_user
Automotive
Creating a single wheel is done by setting the parameter "single". Well, a single-wheel drive is also unlikely to be thoughtful ....
Yes, there are no such pendants in the standard set of examples. But again, you can repeat some of the existing structural elements.
Please specify with what component appear difficulties?
Yes, there are no such pendants in the standard set of examples. But again, you can repeat some of the existing structural elements.
Please specify with what component appear difficulties?
- Thread starter
- #3
Like I wanted to create a 3 wheel all drive vehicle. So in this vehicle I would have a rear single suspension system. How would I would I get this on Adams Car on a single wheel that also in front of the tyre patch and not on the sides connected to the hub (like usually in 4 wheel cars)? I could not find any presets for these.
- Status
Similar threads
- Locked
- Question
