Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

how can I model vibrating magnet and a coil setup .. getting induced voltage and force ?!!

Status
Not open for further replies.
Peterehab

Peterehab

Mechanical
Joined
Feb 6, 2017
Messages
1
Location
GB
i want to model a permanent vibrating magnet near to a coil ... and get the induced voltage and the force created between the magnet and the coil
can anyone help me with that using abaqus .. i have 6.12
thank u in advance guys
 
Status
Not open for further replies.

Similar threads

F
  • Locked
  • Question Question
How can I obtain integrals over curves and surfaces?
Replies
1
Views
1K
FEA way
FEA way
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
2
Views
4K
SWComposites
SWComposites
Sakthiiitm
  • Locked
  • Question Question
Regarding section forces and stress in a model
Replies
2
Views
586
Sakthiiitm
Sakthiiitm
A
  • Locked
  • Question Question
Unstable Reaction Force and Unrealistic Elastic Modulus in Abaqus HPC Simulation
Replies
1
Views
2K
FEA way
FEA way
A
  • Locked
  • Question Question
How can I correctly model the damping behavior in ABAQUS for unidirectional composites to achieve realistic oscillations that decay over time?
Replies
6
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top