Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HOT WATER BOILER DESIGN (ACCORDING TO EN12953-3 2016)

Status
Not open for further replies.
apooyana

apooyana

Industrial
Joined
Nov 19, 2007
Messages
8
Location
NL
"The difference between the saturation temperature corresponding to the maximum operating pressure, and
the outlet temperature, should not normally exceed 80 K."
Dear sir/lady
Hi,
Above paragraph is about hot water design. What's the reason? Thank's
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
What materials for design of ultra-supercritical boiler tubes?
Replies
2
Views
540
btwlzyq
B
Ronak_Patel
  • Locked
  • Question Question
commercial software for design of pressure vessel and heat exchanger according to ASME SEC ||| for nuclear application.
Replies
1
Views
5K
MJCronin
MJCronin
1
  • Locked
  • Question Question
Boiler feed water pump shutting down when blowing down
Replies
8
Views
4K
LittleInch
LittleInch
IHQ22
  • Locked
  • Question Question
Software to track boiler watertube repairs, replacements, inspections, etc
Replies
1
Views
2K
Dhurjati Sen
Dhurjati Sen
Whin
  • Question Question
Boiler Inspection Software
Replies
1
Views
7K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top