Hooland profile

[VzHache]

Hi guys,

I have to build a FE model which represents a ship structure. This structure is made of "holland profile" beams.

Does anyone know a website that lists the size of such profile ?

For information, I'm looking for size of HP 300x12 and 320x12.

Many thanks in advance.

V.

 

[Ussuri]

HP is the designation for bulb flats. Sections used to stiffen the plate.

An HP 300x12 is basically a 300mm deep by 12mm wide stiffener with a large bulbous end on the tension side, 45mm by 43mm in the case of the 300x12

http://www.corusconstruction.com/en...perties/british_standard_sections/bulb_flats/