Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Honeycomb replacement

Status
Not open for further replies.
FAACRS

FAACRS

Aerospace
Joined
May 12, 2006
Messages
3
Location
US
Turbine engine labyrinth air seals require honeycomb replacement and knife edge build-up to restore and prevent leakage in and around bearing areas, and cooling air passages. Is the process of sweating the honeycomb to a parent material an avaliable standard?
 
Status
Not open for further replies.

Similar threads

sarclee
  • Locked
  • Question Question
Spacecraft Honeycomb
Replies
11
Views
1K
Compositepro
Compositepro
Mines Mech E
  • Locked
  • Question Question
Honeycomb core panel analysis using Hexcel procedure - QUESTION
Replies
3
Views
618
SAITAETGrad
SAITAETGrad
Hood91
  • Locked
  • Question Question
Shear Stress in Dual Core Honeycomb
Replies
11
Views
465
aerostress82
aerostress82
Burner2k
  • Locked
  • Question Question
Honeycomb Sandwich Close Outs Modeling (FEA/Nastran)
Replies
7
Views
794
Burner2k
Burner2k
boo1
  • Locked
  • Question Question
NAS 1008 Replacement with Coase Thread Fastener
Replies
0
Views
111
boo1
boo1

Part and Inventory Search

Sponsor

Back
Top