Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High temperature, high hydrogen density optical plastic

Status
Not open for further replies.
dtiller

dtiller

Nuclear
Feb 6, 2002
2
Hi,
I am looking for a high temperature (Tg ~ 180C), hydrogen dense (>6% H by mass), optical (light transmission > 70% from 350 nm to 600 nm) resin. This resin is to be shaped via injection moulding.
Thanks
 
Status
Not open for further replies.

Similar threads

subsearobot
  • Locked
  • Question
sourcing optical PMMA
Replies
1
Views
2K
Mech1595
Mech1595
MechMatengineer
  • Question
Quality control for plastic piping
Replies
1
Views
3K
Pud
Pud
Thanh_fromVietnam
  • Locked
  • Question
Best plastic material/ grade for Plastic Pallet 1
Replies
2
Views
994
dgallup
dgallup
Snowshovel1
  • Locked
  • Question
Best plastic material /grade for snow shovels
Replies
4
Views
2K
IRstuff
IRstuff
Azeen
  • Locked
  • Question
Mixing virgin and recycled Polypropylene Granules in single use plastic straw extrusion machine
Replies
5
Views
885
Linda0510
Linda0510

Part and Inventory Search

Sponsor

Back
Top Bottom