Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High Pressure Valve Ratings

Status
Not open for further replies.
ymjaffar

ymjaffar

Mechanical
Joined
Dec 4, 2008
Messages
10
Location
OM
Dear,
What will be thickness of the flanges using for high pressure rating valve of 5000#, 10000# etc.
How we calculate the blind thicness and clamping force required for the all ratings valve with different sizes.

Thankss.........
 
Sort by date Sort by votes
Thanks seagull,

I found that higher rating valve is there but below 2" size, I want to calculate the flange thickness for the higher ratings flange.

jaff
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
EngTal
  • Question Question
Gland becomes brittle and porous in High Pressure NH3 service
Replies
1
Views
6K
Danlap
Danlap
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
Ram55
  • Locked
  • Question Question
Pressure reducing valve testing
Replies
2
Views
3K
Ram55
Ram55
nihili
  • Locked
  • Question Question
Throttle valve for high pressure steam
Replies
0
Views
501
nihili
nihili

Part and Inventory Search

Sponsor

Back
Top