carburized
Mechanical
Hello
Does anybody know, if needle bearings can go upio as high as 12000 rpm. If so, where to get them.
Does anybody know, if needle bearings can go upio as high as 12000 rpm. If so, where to get them.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hi speed bearing
- Thread starter carburized
- Start date
- Status
EnglishMuffin
Mechanical
Yes, INA for example. But it depends on how small a diameter you can afford to go to. (37mm ID with no inner race, 32mm ID with).
EnglishMuffin
Mechanical
I should also have mentioned - that was with oil lubrication.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
