silentzbob730
Civil/Environmental
HOW DO YOU GET THE PERIOD TO BE .5, MY PERIOD IS TOO LARGE.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
HELP!!!
- Thread starter silentzbob730
- Start date
- Status
go to define and analisecase,choose the modal and modifay it.you will see max number of modes make it five.
but there is important point.at least %90-95 of counstruction must join the analize.it can not be enough for high building.every time check it.
it can be taken 3 for each floor.by the way if your period too large.you can also see period 5 and other.go to display.and and show the deforme shape for modal,dead,and other loads...using arrows near the animation button you can arrive easly 5thperiod of bulding.
but there is important point.at least %90-95 of counstruction must join the analize.it can not be enough for high building.every time check it.
it can be taken 3 for each floor.by the way if your period too large.you can also see period 5 and other.go to display.and and show the deforme shape for modal,dead,and other loads...using arrows near the animation button you can arrive easly 5thperiod of bulding.
- Status
Similar threads
- Locked
- Question
- Locked
- Question