help with windings

[jag27]

i have a stator for a brushless dc motor with about 60% slot fill
need help winding it

single tooth

 

[nbucska]

Do you want to rewind it for the same VTG or different ? <nbucska@pcperipherals.com>

 

[jag27]

new winding

15-18 guage wire

 

[nbucska]

Do you want to rewind it for the same voltage or different?
( if later, give both ) <nbucska@pcperipherals.com>

 

[jag27]

same voltage

12 v

 

[nbucska]

What is the problem? cut out a section of a coil, count the turns, etc. <nbucska@pcperipherals.com>

 

[jag27]

no i need to find a company that does in slot windings on a mass production basis

 

[jbartos]

Suggestion: It may be a good idea to start with windings. Visit

http://www.thomasregister.com

and type Coils: Copper (Electrical, Motor, Wire Winding Types) under Product or Service which will return 22 companies to contact for windings and a mass production.

 

[jag27]

anybody did any work with a company called electrowind

 

[ognen]

no, but what do you need exactly?
I'm working in such industry?
contact me at gjovanoska@mt.net.mk

 

[jag27]

about 70% slot fill
16-18 guage wire
3 in hand
9turns
skew of 1/2 slot ( 9 slots total)