Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with editing the CSE driver for NX CAM

Status
Not open for further replies.
pajalin

pajalin

Automotive
Joined
May 24, 2014
Messages
18
Location
CZ
Hello everyone,

Would anyone be here to help me modify the CSE driver for the DMG MORI NZX2000? I used the CSE driver FANUC from OOTB sim15_millturn_9ax. I need to change the driver for two revolvers. One revolver at the top and the other down. In OOTB there is a head with B axis and it does not work.


thank you very much
 
Status
Not open for further replies.

Similar threads

kanoa9321
  • Locked
  • Question Question
NX CAD CAM Workstation Recommendations
Replies
4
Views
4K
Rob_N
Rob_N
P
  • Question Question
any company/individual with a NX licese for sale?
Replies
2
Views
2K
peritoind
P
D
  • Locked
NX Help
Replies
2
Views
3K
Toost
Toost
Nahid Mubin
  • Question Question
Standard Practice for Drafting in NX
Replies
3
Views
9K
GigaManf
G
2_BIG
  • Question Question
NX For Dummies?
Replies
3
Views
5K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top