Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with Belt drive for robotics...
- Thread starter DumbKid
- Start date
- Thread starter
- #2
Damn, Oh well. it messed up
Anyways , I need 2, 2" drive belts 5' long, One side needs to be driven by a pulley, the other side doesn't matter. Does anyone know where to find this kind of belt ? Does it have to a custom-made belt? If so, what cost am I looking at?
Thanks alot.
DumbKid (Electrical) [sig][/sig]
Anyways , I need 2, 2" drive belts 5' long, One side needs to be driven by a pulley, the other side doesn't matter. Does anyone know where to find this kind of belt ? Does it have to a custom-made belt? If so, what cost am I looking at?
Thanks alot.
DumbKid (Electrical) [sig][/sig]
WildDesign
Mechanical
you should probably be using a timing belt. You can find them from Berg, Boston Gear, Browning, or just about any power transmission vendor. You can find a whole listing of many of them at powertransmission.com
- Thread starter
- #4
[sig][/sig]- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question
