Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help to ID an old wet valve please

Status
Not open for further replies.
ContractorDave

ContractorDave

Mechanical
Joined
Jan 16, 2007
Messages
364
Location
CA
I have an old wet valve I need I.D'd if anyone can help. Attached is a pic of the markings on the back. Unfortunately the pic of the front of the valve did not turn out but it has a large arrow cast into it. I've seen it before but I can't remember which inspection. It's a greeny gray with

Model 153
175 (AA) 1962 Automatic?
6

Thx
Dave
 
Status
Not open for further replies.

Similar threads

SprinklerDesigner2
  • Question Question
I have an older warehouse being converted to an public assembly arena. Does anything need to be done with the sprinkler system?
Replies
5
Views
5K
MGXFP
MGXFP
S
  • Question Question
Freelance start up help
Replies
3
Views
19K
LittleInch
LittleInch
P
  • Question Question
NFPA 20 - Check valve on fuel return line
Replies
1
Views
3K
LittleInch
LittleInch
N
  • Locked
  • Question Question
Help with Fire Sprinkler Design Area
Replies
5
Views
8K
Danefre
Danefre
Ribicki
  • Locked
  • Question Question
Automatic release valve position
Replies
3
Views
595
Ribicki
Ribicki

Part and Inventory Search

Sponsor

Back
Top