Help selecting conductive and wear resistance bearing material

[ag22]

Dear Friends,
I'm looking for a specific material for washer (0.25mm thick). The washer should be conductive. The washer will be rotating over annealed 302 SS housing, 0.25mm thick.
Please suggest which materials/plating I should consider for minimum wear of the washer.
Thanks.
Best regards,
ag22

 

[itsmoked]

Whoa!! You be posting this in the wrong forum! This is a communications forum! You need a materials.

Keith Cress
Flamin Systems, Inc.-

http://www.flaminsystems.com