Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help on modeling 1

Status
Not open for further replies.

cubalibre000

Mechanical
Joined
Jan 27, 2006
Messages
1,070
Location
IT
Hi,
as you can see from the image attached, I'd like to obtain the result as indicated.
What suggestions can give me ?
I've tried rplace face, but nothing.
I need to split the body, make the replace face and unite again ?
Attached also the part.

Thank you...

Using NX 8 and TC9.1
 
Extend your swept face to protrude your body.
It worked for me in NX8.5

Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

 
 http://files.engineering.com/getfile.aspx?folder=b4809f7a-bbfd-4352-bfe3-9cdb5225a3c0&file=Replace_Face.jpg
Like a picture a movie speaks a thousand words...

Ronald van den Broek
Mechanical Engineer
Cad Environment Coordinator
Wärtsilä, Propulsion Services
NX8.5.3 / TC9.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

 
 http://files.engineering.com/getfile.aspx?folder=4bd5ba0e-168b-420a-b09e-a8397dc23ea4&file=Replace_Face.wmv
Thanks for the help.

Thank you...

Using NX 8 and TC9.1
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top