Help in identifying some screw types. 2

[ricardoMG]

Please help me to identify the following types of screws, if possible telling me what standards identify them:

- TRX type screw (I know it's used in wood)
- "Euroscrew" CX (also for wood)
- TFX type screw (also for wood)
- MK6S bolt
- M6M nut lock
- M6M nut
- "Euroscrew" FX (also for wood)
- MVBF screw

I would appreciate your help.

Thank you.

 

[Screwman]

Ricardo,
Most of those look like commercial tradenames from a distributor. I don't recognize any of them from standards. There are very few standards that apply to fasteners intended for use in wood.
Good luck with your search; wish I could be more help.
You might try Googling each of the terms to see what you find.

Dick

 

[ricardoMG]

Screwman, I already Googled every one of these and it didn't give me all the answers. Thanks anyway.

 

[codeeng]

These are all from DIN standards. See attached link for typical forms:

http://tilka.mesh.se/teknik/TEKNIKSIDOR.htm

 

[ricardoMG]

Thank you very much codeeng! You've been very helpful!

 

[Screwman]

Codeeng,
Hey, good find! I have always worked off of the DIN numbers, I've never seen those callouts before. Something new every day.

Dick

 

[codeeng]

I worked in Europe once and all this got DIN'd into me!