Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HELP how to make a mesh on an Umbrella?

Status
Not open for further replies.
Kleinegabriella

Kleinegabriella

Mechanical
Joined
Dec 27, 2002
Messages
1
Location
US
Hello, if somebody can help me, I have to analize an Umbrella in a Windtunnel, using FLUENT. I tried to make the umbrella in ProE and export it to gambit as an IGES file, but after I have made the windtunnel in gambit, when I try to make the mesh, doesn't work. Somebody has an idea? THANKS
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
MatthewLynch
  • Locked
  • Question Question
How to mesh spot weld
Replies
9
Views
1K
BlasMolero
BlasMolero
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
3
Views
3K
SWComposites
SWComposites
D
  • Locked
How to take pickup support
Replies
0
Views
3K
deepak1313
D
F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH

Part and Inventory Search

Sponsor

Back
Top