HELP!! Compressor Station Piping and Pipeline Construction 1

[arcran]

Dear Sirs,

Good day,

I am Randy and junior piping engineer as per contract position here in bangladesh

I posted here to get some help in Piping and Pipeline Construction Methods

It is my first time to work at site, i only have a few experience in piping
mostly in preparing drawings since i am new in oil and gas industry.

So much for the intro..

CAN ANYBODY HELP ME OR GIVE ME SOME TIPS IN PIPING CONSTRUCTION, ANY METHODS PROCEDURES
GUIDES ANYTHING THAT CAN HELP ME.WHAT TO DO FIRST ETC..

at this stage, we are still in civil works, foundations, there are no piping yet.

THANK YOU IN ADVANCE FOR YOUR KIND RESPONSE

 

[saplanti]

If you are a site engineer you need to follow the design instructions on the drawings for the construction issues. This type of pipings are unique for the application and the instructions has to be provided either by the compressor manufacturer, if they involved in the design, or the designer of the piping. You only need to follow their instruction on the drawings.
If you create your own you are responsible.

Hope it helps,

Ibrahim demir

 

[C2it]

You need help and guidance from an experienced engineer. Tell your supervisor soon.

If you are alone doing piping on site and expected to make decisions, resign immediately, your employer is not worth working for.

 

[arcran]

Thanks Ibrahim demir, thanks also C2it,

Im a little worried since i dont have experience yet in construction.
ill follow your advises. Thanks a lot.

If you have Any other pre-piping construction tips or guides or
things i should watch out for during civil works so that it
would not cause problems in the piping works or any other rule of thumb
please inform me, that would really help.

Best regards