Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help about converting material properties in Ansys WB

Status
Not open for further replies.
clint05

clint05

Mechanical
Joined
Jan 6, 2011
Messages
7
Location
GR
Hello to everyone!

Is there anyone who can tell me how to convert material properties in order to use these materials in Ansys Workbench 12.1.
I already have the material properties saved in .mac files.

Thank you in advance!
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
2K
struclearner
struclearner
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
815
Rabea-19
R

Part and Inventory Search

Sponsor

Back
Top