i have a heenan drive 9001 mark 2. supplying a 3 phase pump.the drive has a 3 phase supply to it but there is no voltage on the control cards and the remote keypad on the front of the panel is blank all drive internal fuses have been checked.the fault light is constantly on and wont reset
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
heenan drives
- Thread starter mec1
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question