Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HEC-RAS Junction

Status
Not open for further replies.
chicopee

chicopee

Mechanical
Joined
Feb 15, 2003
Messages
6,199
Location
US
One of my six junctions is giving me a headache. The junction editor does not have an entry for the tributary reach eventho it shows an entry for the river reach. Any suggestion short of redrawing this particular tributary.
 
Sort by date Sort by votes
No need to reply. Problem solved, I dont know though, after playing around with the geometric data editor.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PT60056
  • Locked
  • Question Question
HEC-RAS- culvert modeling- huge jump upstream of culvert
Replies
7
Views
5K
TerryScan
T
DrainageEnthusiast
  • Locked
  • Question Question
HEC-RAS Flow Regime
Replies
4
Views
8K
DrainageEnthusiast
DrainageEnthusiast
B
  • Locked
  • Question Question
1D Sediment transport modeling HEC-RAS - Constant errors
Replies
0
Views
7K
bobo67
B
ilopran
  • Locked
  • Question Question
HEC-RAS - 1D Steady - Persistent Warnings
Replies
1
Views
7K
ilopran
ilopran
PT60056
  • Locked
  • Question Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
7K
Ekenny_G
Ekenny_G

Part and Inventory Search

Sponsor

Back
Top