UptownRuler
Civil/Environmental
Does anyone have any insight as to where to get a listing of HEC-HMS warning and error codes with possible causes? I should add that I am running the latest version 4.1.
I am getting some strange errors and warnings about negative flows:
Warning 41201: 4 negative inflows to element "RM-019" set to zero.
equivalent volume (cu ft): -0.0151
I have tried inspecting what is going on here to no avail.
Any ideas?
I am getting some strange errors and warnings about negative flows:
Warning 41201: 4 negative inflows to element "RM-019" set to zero.
equivalent volume (cu ft): -0.0151
I have tried inspecting what is going on here to no avail.
Any ideas?