Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HEC-1 to HEC-HMS Conversion

Status
Not open for further replies.
becksg

becksg

Civil/Environmental
Joined
Feb 5, 2008
Messages
1
Location
US
Hello all,

I am trying to convert a HEC-1 file to HEC-HMS format. I am getting a message saying that JR card is not supported. So how can I incorporate DARF in my HEC-HMS model?

I did find that we can create separate run with different precipitation ratio and I created 5 separate runs. Now is there a way to view results from all the five runs in one window?

Your help is highly appreciated.

Thanks
 
Status
Not open for further replies.

Similar threads

PT60056
  • Locked
  • Question Question
HEC-RAS- culvert modeling- huge jump upstream of culvert
Replies
7
Views
5K
TerryScan
T
B
  • Locked
  • Question Question
1D Sediment transport modeling HEC-RAS - Constant errors
Replies
0
Views
7K
bobo67
B
DrainageEnthusiast
  • Locked
  • Question Question
HEC-RAS Flow Regime
Replies
4
Views
8K
DrainageEnthusiast
DrainageEnthusiast
PT60056
  • Locked
  • Question Question
Hec-Ras- Cliping a large HEC-RAS model to a small specific area
Replies
3
Views
7K
Ekenny_G
Ekenny_G
ilopran
  • Locked
  • Question Question
HEC-RAS - 1D Steady - Persistent Warnings
Replies
1
Views
7K
ilopran
ilopran

Part and Inventory Search

Sponsor

Back
Top