Heavy-Duty Gate Valve

[torq6]

I need to find a good supplier/manufacturer (price, quality, reliability) for gate valves with working pressures of up to about 800 psi for water supply. Thanks.

 

[NozzleTwister]

You can't have both. LOL (i.e. Price & Quality)

All kidding aside, Velan offers a pretty wide range of valves and has a good reputation. They actually have an engineering staff that knows what they are talking about and should be competitive with other manufacturers of quality valves.

Good luck,

NozzleTwister
Houston, Texas

 

[unclesyd]

What is your size requirements?

 

[torq6]

We need 8-inch, 10-inch, and 12-inch. Thanks

 

[unclesyd]

You might give these people a call. Quality yes price ???. The make a very good valve.

http://www.lapump.com/html/products.html

 

[torq6]

Thanks for all the replies. I've since been able to source suitable valves due to your help. However, I still have one problem. All the valves I've seen so far come with a rising stem and handwheel. In the open position the wheel may rise to almost 5 feet, for the 10-inch valves for example. Space is critical. The valves will be in chambers about 3 feet deep. Do valves of these sizes and pressure ratings come with non-rising stem and square wrench nuts? Thanks.