Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heater control valve

Status
Not open for further replies.

s7726

Computer
Joined
Dec 15, 2004
Messages
1
Location
US
I'm looking for a valve to replace the cable/lever driven one that controls the flow of coolant through my heater core. I would like something that i can didgitaly control (PWM?). This is for an incar computer setup that i would like to give control to as much of the car as possible (short of driving it, but that would be cool, hehe).

I'm not sure exactly the type of valve i should be looking for, and most of what i have found hasn't looked like it would handle the heat and possible corrosiveness of the coolant. I also don't want to spend $800 on a valve.

Thanks

Gavin.
 
Why not put a worm drive (or whatever) on the cable, and use a stepper motor, or just a wiper motor. Any car with automatic climate control has solved this problem, just take a walk around a scrap yard to see a thousand solutions (or more likely three solutions a thundred times)

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top