Heat treating device on 1" piping weld at 750¦C

[abbver98]

I need eletrical resistance device for heat treating on piping welding of 1" and temperature of 750°C. Do you have any address ?

 

[eyec]

do you need a manufacturer of the equipment or heat treat contractor?

Cooperheat (now part of MQS) or Stress Analytics are two contractors i am aware off the top of my head.

both based in the US

 

[abbver98]

manufacturer of the equipment

 

[unclesyd]

Here are two more that I have worked with in the past with good results.
Mannings has both types of heating equipment, resistive and inductive.

http://www.manningsusa.com/

http://www.techeat.com/

Here is Team’s site. They have been moving around lately so I don’t know exactly what they still do.

http://www.teamindustrialservices.com/index.html

 

[abbver98]

unclesyd,
I don(t see any equipment that match my need.
I still need help !

 

[unclesyd]

Give either company a direct call as both have equipment that should easily go that high. We have worked at 1850°F several times.
If by chance they can't fill the need I'll look around for a maker of clam shell heaters that could be used.

 

[JKEngineer]

Would inductive heating work for this application? If so, contact Ameritherm at

http://www.ameritherm.com

Jack


Jack M. Kleinfeld, P.E. Kleinfeld Technical Services, Inc.
Infrared Thermography, Finite Element Analysis, Process Engineering

http://www.KleinfeldTechnical.com

 

[Vision1]

Yes, an induction heating setup may be worth investigating for heat treating at this temperature. The Ameritherm folks sell a good power supply if that's all you need. If you want an entire custom-built induction heating system, try

http://www.inductionatmospheres.com.

They take Ameritherm products and add all the fixturing.

 

[JKEngineer]

Watlow provides resistance heaters, as do several others.
Jack

Jack M. Kleinfeld, P.E. Kleinfeld Technical Services, Inc.
Infrared Thermography, Finite Element Analysis, Process Engineering

http://www.KleinfeldTechnical.com