Heat transfer simulation. Estimate total heat flux on surface

[asimpson]

Using Simulation on ST5 Premium and doing a heat transfer problem I wish to acess the designs of thermal insulation.

I can get a profile of heat flux at outer surface but can't find out how to work out the total heat flux at the surface.

See attached image.

Is this possible?

Many thanks?

 

[Kenny_G]

Try asking at the SE Community site (link below). Followed by way more SE folk than here...

Ken G.

http://grundey.blogspot.com

Have you checked out the Solid Edge Community site?

http://community.plm.automation.siemens.com/t5/Solid-Edge/ct-p/solid-edge