Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hatch

  • Thread starter Thread starter groembke
  • Start date Start date
G

groembke

Guest
is there a way to create an area cross section without hatch lines?
 
The quickest way is too select the area cross hatching right click and select properties. Select spacing from the hatching menu and value. enter a large number until there are no lines.
 
if its a assembly u can do one thing select the area and click exclude component so that the hatching dissepers.

magi
 
You must log in or register to reply here.

Similar threads

Z
Open sketch with cross hatch
Replies
9
Views
9K
zpaolo
Z
R
Incorrect hatching
Replies
0
Views
3K
Robaczek
R
Tunalover
  • Locked
  • Question Question
Getting text in cosmetic features to fill or densely hatch
Replies
0
Views
145
Tunalover
Tunalover
wtxhorsman
  • Locked
  • Question Question
Change Cross Hatching (XHATCH)
Replies
0
Views
254
wtxhorsman
wtxhorsman
Z
Change default cross-hatching color
Replies
0
Views
4K
zpaolo
Z

Part and Inventory Search

Sponsor

Back
Top