Harness / Wire / Schematic solution

[cubalibre000]

Hi,
we want to improve our design, adding 3D wire and electric scheme.
I look for NX Schematic and it's very poor.
I look for NX Routing and cost 20000 Euro for seat and we need to much configuration.

Then we have look at EPLAN that has a good schematich tool and 3D wiring. It's has lots of library configured.
The price is small respect to NX routing.
There are some NX users that use EPLAN that can tell me they opinion, suggestion about use / configuration, bundle and more to use with NX ?

Thank you...

Using NX 8 and TC9.1

 

[kapmnit123]

Hi Cubalibre,
I guess you might have looked into NX logical routing for creating Schematic Diagrams. You can look into NX-LTX schematic package to do so (Routing Logical is used primarily for P&ID only).
Sorry i have never worked on EPLAN so cannot comment on the same.
Best Regards
Kapil

 

[cubalibre000]

Yes Kapil,
I've looked for into NX-LTX schematic package and the tool is less interesting that free ECAD package.

Thank you...

Using NX 8 and TC9.1