Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Harmonic current flow

Status
Not open for further replies.

gtf

Electrical
Joined
Apr 20, 2001
Messages
5
Location
MY
Why is harmonic current flow is always indicated as from the non-linear load/s end towards the source end ("backwards" from normal load current flow) ?
 
The nonlinear load is a source of harmonics. If electrical equivalent circuits are drawn, one for each harmonic frequency, the different frequency sources (harmonic frequency sources) will be located at the nonlinear load location and the harmonic currents will be flowing from it. If the normal power source does not have any harmonics (an ideal case) then the harmonic electrical equivalent diagrams will have no trace of the normal (ideal) power source. If there happen to be used harmonic current mitigators (filters, power line conditioners, etc.), the harmonic current will tend to sink in those.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top