Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hardware key 1

Status
Not open for further replies.

leblanc49

Mechanical
Dec 16, 2002
1
Cutler-Hammer D-100 need physical hardware key on parallel port, any idea what's in connector?
 
Replies continue below

Recommended for you

Yes it does. I took one apart several years ago and if I remember correctly it had a chip of some sort and a couple of resisters.
 
The Ic-s behavior can not be determined by test during the lifetime of the universe.

A combinatorial logic with N inputs may have 2^(2^N)
possible states. Any bit of memory is equivalent to
an input so N = number of (inputs + memorybits )

A 1Kbit memory will have two to the
1.27x 1,000,000,000,000,000,000,000,000,000,000 possibilities.

There is one way: autopsy the chip and measure under
microscope with micromanipulator -- a major project. <nbucska@pcperipherals.com>
 
Sorry, an error: The 1.27e30 is the EXPONENT of 2
-- so I slightly nderestimated the complexity... <nbucska@pcperipherals.com>
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor