Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardware for Heavy Oil delivery, 1.00 gram

Status
Not open for further replies.
ZeoliteMan

ZeoliteMan

Computer
Joined
Sep 30, 2002
Messages
6
Location
NO
I need to deliver 1.00 gram of crude oil, meaning that I would normally have to heat up a syringe, or whatever hardware I should use, to 60-80 degrees C. The problem to solve, is to know afterwards the amount of oil injected/delivered, without having to measure the weight of the syringe/hardware before/after to see how much was delivered.
Anybody got some good suggestions I should check out ?
Martin
 
Status
Not open for further replies.

Similar threads

_1angelia23
  • Locked
  • Question Question
Delivery Conditions N and Q of Pipeline
Replies
2
Views
3K
SJones
SJones
J
  • Question Question
Jacking Oil Pump Air Lock Bleed Valve
Replies
5
Views
7K
LittleInch
LittleInch
Inchtain
  • Locked
  • Question Question
Underground Oil & Water Pipelines
Replies
12
Views
5K
LittleInch
LittleInch
Henrique Orlandini
  • Question Question
Determining flow through a half full gravity return oil line
Replies
10
Views
8K
Henrique Orlandini
Henrique Orlandini
jonjose123
  • Locked
  • Question Question
Settlement of Oil Pipeline due to Leakage of Water Pipeline.
Replies
9
Views
4K
Snickster
Snickster

Part and Inventory Search

Sponsor

Back
Top