Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardware for Heavy Oil delivery, 1.00 gram

Thread starter ZeoliteMan
Start date Jul 13, 2004

Status: Not open for further replies.

Jul 13, 2004

ZeoliteMan

Computer

I need to deliver 1.00 gram of crude oil, meaning that I would normally have to heat up a syringe, or whatever hardware I should use, to 60-80 degrees C. The problem to solve, is to know afterwards the amount of oil injected/delivered, without having to measure the weight of the syringe/hardware before/after to see how much was delivered.
Anybody got some good suggestions I should check out ?
Martin