Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

H/D ratio

Status
Not open for further replies.
jtseng123

jtseng123

Mechanical
Joined
Jun 6, 2012
Messages
530
Location
US
thread1452-277972

Hi all,

In odder to make a tank become shop fabricated, we would like to make it 15' diameter and 40' high. The H/D ratio is 4. If foundation is ok, will this ratio be considered acceptable ? Any special concerns ?
 
Sort by date Sort by votes
Fairly common practice. It will probably require anchor bolts for wind overturning.
 
Upvote 0 Downvote
For the shop fabricated tanks I have specified, 15 foot diameter is outside the limits of transport. When the clearance for the required transport trailer is included (2.5 ft) you are approaching 18 foot vertical clearance.

In the USA, 12 to 14 foot tank diameter is about the maximum for transport under bridges.

The 40 foot length is not a problem...

MJCronin
Sr. Process Engineer
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

rohit307
  • Question Question
Anchorage Ratio for Rectangular Tank
Replies
6
Views
5K
rohit307
rohit307
JoshRanch
  • Question Question
Head Joint Design for UL 142 Tanks
Replies
2
Views
1K
HTURKAK
HTURKAK
EmilianoS87
  • Question Question
API 650 - E.6.1.4 Dynamic Liquid Hoop Forces
Replies
5
Views
2K
EmilianoS87
EmilianoS87
tmgczb
  • Locked
  • Question Question
How is pressure under tank bottom plate distributed？
Replies
11
Views
3K
IFRs
IFRs
tmgczb
  • Locked
  • Question Question
How do mechanical engineers consider Mean Recurrence Interval(MRI)for wind load?
Replies
16
Views
2K
Snickster
Snickster

Part and Inventory Search

Sponsor

Back
Top