Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

gluing polycarbonate to itself

Status
Not open for further replies.
disarco

disarco

Mechanical
Joined
Dec 10, 2005
Messages
1
Location
US
Anyone know where to purchase a small amount of Methylene chloride (Dichloromethane). I'm told they are the same. About 4/6 ounces would be plenty. I will use it to glue two pieces of polycarbonate together. Thanx for any help.
 
Sort by date Sort by votes
Ajax chemicals used to carry it

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Upvote 0 Downvote
Ridout plastics, San Diego Ca has IPS WeldOn #3 (methylene chloride) in small quantities.
Be aware that air pollution control boards are banning the use of this chemical in certain areas.
B.E.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dogbural
  • Locked
  • Question Question
Injection moulding with polycarbonate
Replies
10
Views
1K
dogbural
dogbural
enginesrus
  • Locked
  • Question Question
Adhesive for Polyethylene to Stainless steel
Replies
2
Views
3K
TugboatEng
TugboatEng
Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
960
Buckshott00
Buckshott00
ESTinker
  • Locked
  • Question Question
Polycarbonate with wax/paraffin, oils, and food coloring
Replies
3
Views
496
3DDave
3DDave
dogbural
  • Locked
  • Question Question
self tapping screw to polycarbonate material
Replies
5
Views
1K
Pud
Pud

Part and Inventory Search

Sponsor

Back
Top