Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

GF 40/43 flange specs

Status
Not open for further replies.
Bow123

Bow123

Mechanical
Joined
Dec 3, 2008
Messages
2
Location
US
I need the dimensions of a GF 40/43 flange. Where can I find it? It's for a Grunfos UP43-75F pump and I don't know if that flange is an industry standard or for Grunfos only. What does GF stand for? Thanks.
 
Sort by date Sort by votes
No, these are not standard flanges. They must be a special Grunfos Flange. GF likly stands for Grunfos Flange or something similar. You will have to contact Grunfos directly for information on this flange.
 
Upvote 0 Downvote
I would be surprised if the pump came with non-standard flanges. Check the context - I wouldn't be surprised if the use of the 'GF40/43 flange' was meant to mean 'flange on the Grunfos size 40 or 43 pump'...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Jungpao
  • Locked
  • Question Question
Pump flange threaded hole
Replies
2
Views
453
LittleInch
LittleInch
SPKR
  • Locked
  • Question Question
Friction loss for Flanged Concentric reducer
Replies
4
Views
3K
TenPenny
TenPenny
Shaharudin07
  • Locked
  • Question Question
Flange Face and Valve Flange type
Replies
5
Views
350
LittleInch
LittleInch
Simba12345
  • Locked
  • Question Question
4 hole flanges and butterfly valve
Replies
11
Views
524
pierreick
pierreick
MechEngineer2012
  • Locked
  • Question Question
Seized studs on discharged flange of Between bearing pump
Replies
2
Views
140
quadtracker
quadtracker

Part and Inventory Search

Sponsor

Back
Top