Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Get the plane and axis system of the sketch

Status
Not open for further replies.
NaWin55

NaWin55

Mechanical
Joined
Mar 21, 2020
Messages
98
Location
IN
Hi
i have a sketch and i need to find to which axis system or plane it is belonging to by vba
and then i need to make those axis system or plane as reference
how to find it using VBA

Thanks
 
Sort by date Sort by votes
are you using CATIAs VBA editor? you can explore the properties and functions of your elements through that interface. Have you located/read the V5Automation.chm file? pls. do
You can also try recording a macro to get you in the right direction

regards,
LWolf
 
Upvote 0 Downvote
Yes after reading in CHM file i tried this
Set myAxis = mySketch.AbsoluteAxis

but i didnt get the main axis system

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sidtha
Get the required proprties from the property window from the bundle segment in catia v5 using vba
Replies
3
Views
6K
crshears
crshears
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
A
  • Question Question
Help for Macros that "scanns" the CATdrawing sheet to get Part Number and Drawing sheet no.
Replies
3
Views
14K
Little Cthulhu
Little Cthulhu
TiagoFigueiredo
  • Locked
  • Question Question
Axis system full path
Replies
6
Views
5K
yamaCad
Y
NirVidP
  • Locked
  • Question Question
Get the plane / face of sketch
Replies
0
Views
254
NirVidP
NirVidP

Part and Inventory Search

Sponsor

Back
Top