samond
Civil/Environmental
- Jun 26, 2013
- 9
Would anyone like to vouch for GeoKrete Geopolymer?
Our municipality usually rehabs our manholes that have been deteriorated by H2S with calcium aluminate and then an epoxy coating. A contractor has requested we try a geopolymer instead. Could anyone speak to the performance of this material? What kind of surface prep is required? Ambient temperatures a factor in cure time? It sounds like the epoxy step could be eliminated? Am I understanding correctly?
Thank you in advance for any information you might provide.
Our municipality usually rehabs our manholes that have been deteriorated by H2S with calcium aluminate and then an epoxy coating. A contractor has requested we try a geopolymer instead. Could anyone speak to the performance of this material? What kind of surface prep is required? Ambient temperatures a factor in cure time? It sounds like the epoxy step could be eliminated? Am I understanding correctly?
Thank you in advance for any information you might provide.
