how can i set post builder to output right after tool list or
before or after tool change such a code G90 G10 L12 PXX RXX
PXX XX=tool number, RXX xx=tool radius
seems to be pretty easy to output this code but my problem is first tool.
instead of first tool radius post outputs last tool radius value
N3 (TOOL #2 DRILL-2.5 )
N4 G90 G10 L12 P2 R3.000
R3.000 for a drill dia. 2.5mm???. last tool in the program is end mill dia. 6.0mm
post and file attached
before or after tool change such a code G90 G10 L12 PXX RXX
PXX XX=tool number, RXX xx=tool radius
seems to be pretty easy to output this code but my problem is first tool.
instead of first tool radius post outputs last tool radius value
N3 (TOOL #2 DRILL-2.5 )
N4 G90 G10 L12 P2 R3.000
R3.000 for a drill dia. 2.5mm???. last tool in the program is end mill dia. 6.0mm
post and file attached