Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fuse disconnectors replacement

Status
Not open for further replies.
panou

panou

Electrical
Joined
Apr 21, 2005
Messages
33
Location
GR
Hi there.
I am ruuning a project for the replacement of switch disconnectors Rittal type SV3401 and SV3410 with magnetic breakers that should have the following features :
1) Theu must mount on thre-phase bars distance 60mm
2) They must be capable of receiving padlocks

We want this implementation in order to assure IP 20 inside the MCC. Can you propose for some products ?

 
Status
Not open for further replies.

Similar threads

G
  • Question Question
Generator Protection - Selection of Fuse based on Sustained Current
Replies
9
Views
7K
wcaseyharman
wcaseyharman
KernOily
  • Locked
  • Question Question
Replacement Coating for Gas Turbine Clean Room
Replies
4
Views
627
FacEngrPE
FacEngrPE
tiftif
  • Locked
  • Question Question
CYME Largest Fuse Downstream
Replies
0
Views
230
tiftif
tiftif
kartracer087
  • Locked
  • Question Question
Medium Voltage Power Fuse Interrupting Capability
Replies
1
Views
446
dpc
dpc
Dyorsolutions
  • Locked
  • Question Question
Delta:wye xfrmr cut out fuse blown
2
Replies
30
Views
1K
waross
waross

Part and Inventory Search

Sponsor

Back
Top