Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Formula for number of shaker plates to use in entrance

Status
Not open for further replies.
MuddyCrypts

MuddyCrypts

Civil/Environmental
Joined
Jan 15, 2003
Messages
4
Location
US
Is there a given formula to figure out the proper length of, or number of shaker plates (corrugated steel plates)that should be used in a stabilized construction entrance?

For example, should the length of the plates be determined by the circumference of the tire crossing it?

Any advice would help. Thanks.
 
Sort by date Sort by votes
Large stone 6"-12" dia.placed on geotech fabric works real well.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX?
Replies
0
Views
7K
abrarnth
A
Sparky4598
  • Locked
  • Question Question
Best material to use to level concrete pad
Replies
12
Views
9K
dkrekelberg
D
L
  • Question Question
Moisture content of subgrade/subbase for next layer
Replies
3
Views
7K
EireChch
EireChch
K
  • Locked
Minimum horizontal distance between water/domestic lateral lines for townhouse project in California
2
Replies
27
Views
13K
swazimatt
swazimatt
khu
  • Locked
  • Question Question
Is there any requirement for a project alignment to be at the center of ROW?
Replies
9
Views
1K
ACtrafficengr
ACtrafficengr

Part and Inventory Search

Sponsor

Back
Top