Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fluorpolymer Heat Exchanger 1
- Thread starter LuizSouza
- Start date
-
1
- #2
You can get small sizes from George Fischer. For larger sizes and/or high pressures, I think you are limited to metal coated with fluoropolymer on the corrosive fluid side.
"George Fischer, Inc. has introduced the CALORPLAST Compact Shell and Tube Heat Exchanger featuring corrosion resistant material in a compact, lightweight shell. Offered in sizes from two through six inches in diameter for maximum space-saving efficiency, the new heat exchanger is ideally suited for cooling, heating, condensing or evaporating both corrosive and high-purity media....
Polyvinylidene Fluoride (PVDF), Perfluoroalkoxy (PFA)... materials are rated for 280°F"
"George Fischer, Inc. has introduced the CALORPLAST Compact Shell and Tube Heat Exchanger featuring corrosion resistant material in a compact, lightweight shell. Offered in sizes from two through six inches in diameter for maximum space-saving efficiency, the new heat exchanger is ideally suited for cooling, heating, condensing or evaporating both corrosive and high-purity media....
Polyvinylidene Fluoride (PVDF), Perfluoroalkoxy (PFA)... materials are rated for 280°F"
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question