Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fluid Film Load Support

Status
Not open for further replies.
RS82

RS82

Mechanical
Joined
Mar 5, 2012
Messages
35
Location
US
Could anybody be kind enough to explain to me what is a fluid film load support..I was looking at an FEA completed for the washer and seat and the results have load support..what is this and what is significant about this? What are the factors which effect this?
 
Status
Not open for further replies.

Similar threads

AspenMech
  • Locked
  • Question Question
Is ASME U stamp required for buffer/barrier fluid reservoir
Replies
1
Views
906
JJPellin
JJPellin
Raj_2958
  • Locked
  • Question Question
Does presence of H2S> 50 ppm in Pumped fluid require use of Double Mechanical Seals
Replies
2
Views
455
Raj_2958
Raj_2958
Al109
  • Locked
  • Question Question
Process leakage into barrier fluid
Replies
2
Views
1K
SB1976
SB1976
shyamshins
  • Locked
  • Question Question
CK738 SEAL BARRIER FLUID BLACK COLOUR
Replies
0
Views
211
shyamshins
shyamshins
JoeKSU93
  • Locked
  • Question Question
Polycarbonate Fluid Seal for small parts
Replies
1
Views
221
sreid
sreid

Part and Inventory Search

Sponsor

Back
Top