Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flow control valve

Status
Not open for further replies.
lincelec1

lincelec1

Mechanical
Joined
Sep 6, 2019
Messages
2
Location
US
we have an extruder that I installed new gear pump on and now the temp stabilized pressure compensated flow control valve runs the opposite as it did before. Thanks for any info
 
Sort by date Sort by votes
Is the flow control a three-port bypassing valve with no reverse check valve? Someone mixed up connections to the P and bypass port and it is operating backwards.

Ted
 
Upvote 0 Downvote
Not sure its a racine mfg #51850 pump from the 60's or 70's I have not been able to find any info on it to know how it works.It worked fine before the pump was changed.I also read that if inlet flow drops before discharge flow then it can reverse direction, not sure how true that is. Thank you for the response.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Adding load sense to a plain valve
Replies
12
Views
21K
akkamaan
akkamaan
JIC-8
  • Locked
  • Question Question
Geroler Motor Speed Control
Replies
16
Views
2K
JIC-8
JIC-8
HydroBuff
  • Locked
  • Question Question
Parker K220LS Relief Valve
2
Replies
33
Views
2K
FluidPowerUser
FluidPowerUser
yk26
  • Locked
  • Question Question
Hose burst valve for high pressure ratings
Replies
5
Views
659
yk26
yk26
M
  • Locked
  • Question Question
How to calculate flow in a pipe from water level masurements
Replies
3
Views
1K
Heaviside1925
Heaviside1925

Part and Inventory Search

Sponsor

Back
Top